Deco UV Ultra
Light fast damping polyurethane floor system with 100% recycled rubber granulate mat.
Deco UV Ultra
Adapt your system
Your floor
Damping
: Rubber mat 100% recycled, rol 1,5mx24m, 5mm , 1 piece a 36 m²: Silencio dB , ~ 5 kg/m²
Glue layer
PU Adhesive, 700 - 800 g/m²Sealing mass
PU Sealcoat , 400 - 500 g/m²Scratchcoat
SL-PU D30, 0.5 - 1 kg/m²Wearing Course
SL-PU UV, ~ 2.84 kg/m²SL-PU UV HD, ~ 2.84 kg/m²
SL-PU UV NF, ~ 2.84 kg/m²
Topcoat
Satin gloss: Coating PU SG NF Satin Gloss, 125 - 150 g/m²Matt: Coating PU SG NF Matt, 125 - 150 g/m²
2nd Topcoat
Satin gloss: Coating PU SG NF Satin Gloss, 150 - 200 g/m²Matt: Coating PU SG NF Matt, 150 - 200 g/m²
Light fast damping polyurethane floor system with 100% recycled rubber granulate mat.
Deco UV Ultra is especially known for its cushioning properties. This flooring system is not only UV-resistant, but is also provided with an attenuating layer under the casting layer. This polyurethane casting floor offers extra damping with a noise reduction of 18 decibels (∆Lw, prescribed impact sound residential), by applying a rubber granulate mat under the casting layer.
System explanation:
There is a choice of three different casting layers
- SL-PU UV is the standard cast floor.
- SL-PU UV NF is easier to apply due to its thinner hardener.
- SL-PU UV HD with thinner hardener and higher strength
Ideal for:
- Residential areas
- Commercial
Disclaimer
Despite the fact that this calculation system has been carefully compiled, no rights can be derived from the outcome. These calculations are performed on the basis of a number of general principles. The results of the calculations are only an indication. This is because the applicable circumstances for the project concerned for which the order applies cannot be taken into account.