Protect SL-EP 2K
Protect SL-EP 2K is chemical resistant, has a high scratch resistance and a high gloss finish.
Protect SL-EP 2K
Adapt your system
Your floor
Primer / Scratchcoat
Primer GW, 100 - 150 g/m²SL-EP Scratchcoat, ~ 500 g/m²
Primer BHH, 100 - 150 g/m²
Scratchcoat
SL-EP Scratchcoat, 1.3 - 1.5 kg/m²Wearing Course
SL-EP 2K (2 MM): SL-EP 2K , ~ 3.28 kg/m²SL-EP 2K (3 MM): SL-EP 2K , ~ 4.92 kg/m²
Topcoat
Satin gloss: Coating PU MG Satin Gloss, 125 - 150 g/m²Matt: Coating PU MG Matt, 125 - 150 g/m²
Protect SL-EP 2K is chemical resistant, has a high scratch resistance and a high gloss finish.
Protect SL-EP 2K is a seamless heavy-duty flooring system for industrial applications with optional hollow plinth finishing. This cast floor system is suitable for layer thicknesses up to 5 mm. It has a high-gloss finish with strong chemical protection and scratch resistance.
The scratch resistance can be further enhanced with extra sprinkling material consisting of a black and white speck (carborundum and molochite), which also adds a nice shimmer to the floor.
A finish with colour flakes is also an option, in which case the floor must be finished with a transparent coating.
This cast floor can optionally be used in combination with our Quartzline Coating PU MG Matt or Satin Gloss if you wish to have a matt or silk-gloss floor.
This UV-resistant topcoat contains UV absorbers that considerably slow down the yellowing of the floor.
Disclaimer
Despite the fact that this calculation system has been carefully compiled, no rights can be derived from the outcome. These calculations are performed on the basis of a number of general principles. The results of the calculations are only an indication. This is because the applicable circumstances for the project concerned for which the order applies cannot be taken into account.